Another blue screen error solved! One of the message was SYSTEM_SERVICE_EXCEPTION STOP 0×0000003B WudfRd.sys, restarted the pc and this time the message was DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP 0×000000D1 WudfRd.sys.
Ok, i know for sure my windows 10 is good. I shut down the pc, remove ram modules,reset bios, putback the ram's in a different order, start the pc and... everything is good now!
Also, after bios reset you can try to start the pc with only one of ram module inserted at a time for to verify if that partticular module is good!
Hope this post will help you!
Monday, December 10, 2018
Monday, December 3, 2018
asrock motherboard slow boot solved
Lately i have repaired a pc with an old asrock mainboard and a combination of sata and ide hard disks!
Boot process was painfully slow, about 2 minutes to reach the os bootloader! Have to say that os is booting from ide hdd and the IDE hard disk was single and master on the ribbon connector!
The problem was that the hdd jumper was set on "master with slave present" pair of pins!
After i completly removed the jumper from hdd, boot process was returned to normal again, and i think that slowliness on boot was because the BIOS searching in vain for a slave on the ide ribbon.
I hope this information help you - in case you still have IDE hdd coupled on asrock mainboard!
Boot process was painfully slow, about 2 minutes to reach the os bootloader! Have to say that os is booting from ide hdd and the IDE hard disk was single and master on the ribbon connector!
The problem was that the hdd jumper was set on "master with slave present" pair of pins!
After i completly removed the jumper from hdd, boot process was returned to normal again, and i think that slowliness on boot was because the BIOS searching in vain for a slave on the ide ribbon.
I hope this information help you - in case you still have IDE hdd coupled on asrock mainboard!
Subscribe to:
Posts (Atom)